Parrot ANAFI AI Troubleshooting Guide: Fix Common Drone Issues

Resolve common Parrot ANAFI AI issues with our troubleshooting guide. Fix connectivity problems, propeller issues, battery charging errors, and 4G signal loss:

Troubleshooting Tips for Parrot ANAFI AI

1. Propeller Issues

  • Replacement Frequency: Regularly inspect propellers for wear or damage. Replace them if you notice cracks, chips, or decreased performance.

  • Replacement Procedure:

    • Unfold the Arm: Fully extend the drone's arm to access the propeller.
    • Remove the Damaged Propeller: Hold the motor steady and unscrew the propeller by pinching the base and rotating counterclockwise.
    • Install the New Propeller: Align the new propeller according to the diagram provided in the user manual, ensuring correct orientation, and screw it on by rotating clockwise until secure.

2. System Reboot

  • Rebooting All Systems: If you encounter performance issues, power off and reboot all components:
    • Device: Restart your smartphone or tablet.
    • Skycontroller 4: Turn off and then turn on the controller.
    • ANAFI Ai: Power off the drone, wait for a few seconds, and power it back on.

3. FreeFlight 7 Application

  • Reinstallation: If the app malfunctions, consider deleting and reinstalling it.
    • Backup Media: Before reinstallation, back up all media stored within the app, as deletion will remove all media on your device.

4. Resetting Devices

  • ANAFI Ai Reset:

    • Backup: Ensure all media, logs, and credentials are backed up, as resetting will erase this data.
    • Reset Procedure: Use the power button or the "Reset" option in FreeFlight 7 to perform the reset.

  • Skycontroller 4 Reset:

    • Ensure No Drone Connection: Disconnect any drones to prevent unintended takeoff.
    • Reset Procedure: Follow the specified button sequence or use the "Reset" option in FreeFlight 7.

  • Smart Battery Reset:

    • Inconsistent Behavior: If the battery exhibits irregularities, reset it as recommended by Parrot.
    • Reset Indication: Flashing LEDs during the reset process indicate a successful reset.

5. 4G Connectivity Issues

  • Potential Causes:

    • Absence of a SIM card.
    • Incorrect SIM card code entry.
    • Lack of 4G activation.

  • Support: If issues persist, use the "Ask for support 4G" option in FreeFlight 7 and provide the required information for technical assistance.

FAQs:

Q1: How can I ensure my ANAFI Ai is ready for a safe flight?
A1: Perform a pre-flight inspection, including checking battery levels, firmware updates, and the physical condition of the drone (propellers, camera, etc.). Ensure you have adequate GPS and 4G signal strength.

Q2: What weather conditions are unsafe for flying the ANAFI Ai?
A2: Avoid flying in fog, rain, snow, or winds exceeding 14 m/s (50 km/h). Do not fly at night unless in compliance with specific regulations.

Q3: What steps should I follow before launching the ANAFI Ai?
A3:

  • Unfold the arms and remove the gimbal lock.
  • Insert a microSD card.
  • Verify battery levels and secure batteries.
  • Remove the lens cap and clean the lens.

Q4: Are there specific flying environments I should avoid?
A4: Yes, avoid flying:

  • Over populated areas.
  • Near airports, restricted airspaces, or sensitive infrastructure like power plants.
  • Low over water or reflective surfaces, as they can interfere with sensors.

Q5: How do I store the ANAFI AI after use?
A5: Remove the battery and store it at 40-60% charge in a cool, dry place. Attach the gimbal lock and keep the drone in its carrying case.

Related Links

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.