If you've just purchased the DJI Lito 1 or DJI Lito 1 Fly More Combo (RC-N3), congratulations! You're about to experience one of DJI's latest lightweight camera drones, designed for effortless flying, stunning aerial photography and simple operation for both beginners and experienced pilots.
Before taking to the skies, it's important to correctly set up your drone. Proper setup ensures optimal flight performance, improves safety, and helps avoid common issues such as connection problems, failed compass calibration or Return-to-Home errors.
This complete DJI Lito 1 Setup Guide walks you through every step, from unboxing and charging the batteries to completing your first successful flight.
Shop:
Shop the DJI Lito 1
Shop the DJI Lito 1 Fly More Combo (RC-N3)
📖 Related DJI Lito 1 Guides
-
DJI Lito 1 Troubleshooting Guide
-
DJI Lito 1 Safety Instructions Guide
Quick Start Checklist
- Before your first flight:
- Charge all batteries to 100%
- Install the DJI Fly app
- Pair the aircraft with the RC-N3 controller
- Update firmware
- Insert and format a microSD card
- Wait for GPS lock
- Set the Return-to-Home altitude
- Complete a short hover test
What's Included in the Box?
DJI Lito 1
Includes:
-
DJI Lito 1 Aircraft
-
Intelligent Flight Battery
-
DJI RC-N3 Controller
-
USB-C Charging Cable
-
Spare Propellers
-
Gimbal Protector
-
Documentation
DJI Lito 1 Fly More Combo (RC-N3)
In addition to the standard kit, you'll receive:
-
Extra Intelligent Flight Batteries
-
Two-Way Charging Hub
-
Carry Bag
-
Additional Spare Propellers
Always check that all components are present before starting setup.
Step 1: Charge Your Batteries
Before switching anything on, fully charge:
-
Aircraft battery
-
RC-N3 controller
-
Any spare batteries included in the Fly More Combo
Charging everything before your first flight ensures firmware updates can complete without interruption.
Step 2: Install the DJI Fly App
The DJI Fly app is required for:
-
Aircraft activation
-
Firmware updates
-
Camera settings
-
Intelligent Flight Modes
-
Flight logs
Download the latest version from DJI's official website or your device's app store.
Log into (or create) your DJI account before pairing your drone.
Step 3: Prepare the RC-N3 Controller
Insert your mobile phone into the RC-N3 controller and connect it using the supplied cable.
Ensure:
- Phone battery above 50%
- Mobile data or Wi-Fi available for activation
- DJI Fly app installed
Step 4: Install the Battery and Remove the Gimbal Protector
Insert the Intelligent Flight Battery until it clicks securely into place.
Remove:
-
Gimbal protector
-
Protective stickers
-
Transport packaging
Never power on the aircraft with the gimbal protector attached.
Step 5: Power On and Activate Your Drone
Power on the controller first, followed by the aircraft.
The DJI Fly app will automatically detect the new drone.
Follow the on-screen prompts to:
-
Activate your aircraft
-
Register the product
-
Confirm warranty information
Activation only takes a few minutes but is required before your first flight.
Step 6: Update the Firmware
Firmware updates improve:
-
Flight stability
-
Camera performance
-
Battery management
-
GPS reliability
-
Safety features
If prompted, install the latest firmware before flying.
Do not power off the aircraft during the update.
Step 7: Insert and Format a microSD Card
For recording photos and videos, insert a high-speed microSD card.
Recommended specification:
-
UHS-I
-
U3
-
V30 or higher
After inserting the card:
Settings → Storage → Format SD Card
Formatting inside the DJI Fly app reduces the risk of recording errors.
Step 8: Wait for GPS Lock
Before taking off, wait until the aircraft confirms:
- Strong GPS signal
- Home Point recorded
Launching too early may affect:
-
Flight stability
-
Return-to-Home accuracy
-
Positioning performance
Always fly in an open outdoor location for the first flight.
Step 9: Configure Return-to-Home (RTH)
Return-to-Home is one of your most important safety features.
Before flying:
-
Set an appropriate RTH altitude
-
Ensure it clears nearby trees and buildings
-
Verify Home Point has been updated
Proper RTH settings can help recover your aircraft if signal is lost.
Step 10: Perform Your First Hover Test
Choose an open field with minimal wind.
Take off slowly and hover at approximately 2–3 metres.
Check for:
-
Stable hover
-
Responsive controls
-
Camera operation
-
GPS stability
-
Battery information
Only begin more advanced manoeuvres once you're comfortable with the aircraft.
Before Every Flight: Pre-Flight Checklist
Developing a routine helps prevent avoidable issues.
Always confirm:
- Battery fully charged
- Propellers secure
- Gimbal protector removed
- GPS lock acquired
- Home Point updated
- Firmware up to date
- SD card inserted
- Weather conditions suitable
Beginner Flying Tips
If this is your first drone:
-
Fly in Normal Mode
-
Stay below local legal height limits
-
Keep the drone within visual line of sight
-
Avoid strong winds
-
Monitor battery levels closely
These habits will improve both safety and confidence.
FAQs
How do I activate the DJI Lito 1?
Connect the aircraft to the DJI Fly app, log into your DJI account and follow the activation prompts.
Do I need the DJI Fly app?
Yes. The DJI Fly app is required for activation, firmware updates, flight settings and camera controls.
Why won't my DJI Lito 1 take off?
Common causes include:
-
Low battery
-
No GPS lock
-
Firmware update required
-
Compass warning
-
Aircraft not activated
Our DJI Lito 1 Troubleshooting Guide covers these issues in detail.
Do I need to calibrate the compass?
Only when prompted by the DJI Fly app or after travelling long distances.
What microSD card should I use?
Use a UHS-I U3 V30-rated microSD card from a trusted manufacturer for reliable recording.
How long should I wait before takeoff?
Wait until the aircraft confirms GPS lock and Home Point recording before launching.
Is the Fly More Combo worth buying?
For most users, yes. The additional batteries, charging hub and carry bag provide much better value for longer flying sessions.
Where should I fly my DJI Lito 1 for the first time?
Choose a large open field away from people, buildings, trees and power lines with good GPS reception.
Final Thoughts
Setting up your DJI Lito 1 correctly only takes a short amount of time, but it lays the foundation for safe, enjoyable and reliable flying.
Following this guide will help you avoid many of the common issues new pilots encounter while ensuring your aircraft performs at its best from day one.
If you experience any problems after setup, be sure to read our DJI Lito 1 Troubleshooting Guide, and before every flight, refresh yourself with our DJI Lito 1 Safety Instructions Guide to ensure you're flying safely and responsibly.
Continue Your DJI Lito 1 Journey
Shop DJI Lito 1
Shop DJI Lito 1 Fly More Combo (RC-N3)
📖 Read Next
-
DJI Lito 1 Troubleshooting Guide
-
DJI Lito 1 Safety Instructions Guide
