How to Set Up Your DJI Neo Motion Fly More Combo: Step-by-Step Guide

Welcome to the DJI Neo Motion Fly More Combo! Follow this easy, step-by-step guide to unbox, set up, and prepare your drone for the first flight:

Step 1: Unboxing

  • Open the box carefully.
  • Take out the following items:
    • DJI Neo drone
    • DJI Goggles N3
    • DJI RC Motion 3 controller
    • Accessories (batteries, cables, and manual).

Step 2: Charging and Powering On

  1. Prepare the Drone Battery

    • Remove the gimbal protector from the drone.
    • Ensure the battery is correctly installed.
    • Activate the battery: Connect the included USB charger to the USB-C port on the drone.
      • The LED lights will indicate successful activation.

  2. Charge All Devices

    • Use the USB-C cables to charge:
      • DJI Neo drone battery
      • Goggles N3
      • RC Motion controller
    • Fully charge all devices before first use.

  3. Power On Devices

    • Press, then press and hold the power button for 2 seconds to power on:
      • DJI Neo drone
      • Goggles
      • RC Motion controller

Step 3: Download the DJI Fly App

  • Scan the QR code on the box or visit the app store to download the DJI Fly App on your smartphone.

Step 4: Device Activation

  1. Connect the DJI Goggles N3 to your smartphone using a USB-C data cable.
  2. Ensure your smartphone is connected to the internet.
  3. Open the DJI Fly App.
  4. Register or log in to your DJI account.
  5. Follow the on-screen instructions to activate all devices.

Note: If you purchased DJI Care Refresh, complete the binding within 48 hours of activation.

Step 5: Firmware Update

  1. When prompted in the DJI Fly App, update the firmware for all devices:
    • Tap the prompt → Download → Update.
  2. Do not power off or exit the app during the update.
  3. Devices may restart automatically during the update.

Step 6: Replacing the Battery

  1. Power Off the Drone: Press, then press and hold the power button for 2 seconds.
  2. Remove the battery:
    • Press the battery latch and slide the battery towards the back.
  3. Install a new battery:
    • Align, insert, and push the new battery until it clicks into place.

Step 7: Using the Charging Hub

  1. Insert batteries into the charging hub and press them down securely.
  2. Activate the batteries using the USB-C port.
  3. When the LEDs on the hub turn solid, the batteries are fully charged.
  4. Power Bank Feature:
    • Connect an external device to the charging hub.
    • Press and hold the function button for 3 seconds to supply power.

You're Ready to Fly!

Once all devices are charged, activated, and updated, you can enjoy your first flight with the DJI Neo Motion Fly More Combo!

More Helpful Guides for DJI Neo Motion Fly More Combo:

For a visual tutorial watch this:

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.