Resolve common DJI Air 3S Fly More Combo issues with our troubleshooting guide. Fix power problems, GPS signal errors, connection issues, propeller vibration, and firmware update failures:
Troubleshooting Tips for DJI Air 3S Fly More Combo:
-
Drone Won’t Power On
- Ensure the battery is fully charged and securely inserted.
- Press the power button once, then press and hold for 2 seconds.
-
Controller Not Connecting to the Drone
- Restart both the drone and the RC 2 controller.
- Ensure both devices have updated firmware (via DJI Fly App).
- Re-link the RC 2 to the drone:
- Go to the Control Settings in the DJI Fly App → Select Link Aircraft.
-
Drone Not Taking Off
- Verify the Compass and IMU calibrations in the DJI Fly App.
- Ensure a strong GPS signal (at least 10 satellites).
- Check for nearby interference or no-fly zones.
-
Propeller Error or Vibration
- Confirm that the propellers are installed correctly (match the markings).
- Check for any cracks or damage on the propellers. Replace if needed.
-
GPS Signal Not Connecting
- Move to an open area with a clear view of the sky (away from buildings or trees).
- Restart the drone and wait for a stable GPS signal.
-
Firmware Update Fails
- Ensure the controller and smartphone are connected to a stable internet connection.
- Retry the update using the DJI Fly App.
- If issues persist, update using DJI Assistant 2 software on a computer.
-
Poor Battery Performance
- Ensure the batteries are charged fully before flying.
- Avoid extreme temperatures during charging and flying (below 0°C or above 40°C).
- Store batteries at 40-60% charge for long-term storage.
-
Return to Home (RTH) Not Working
- Confirm a stable GPS signal before takeoff.
- Check the RTH altitude setting in the DJI Fly App to avoid obstacles.
- Ensure the Home Point is correctly recorded at takeoff.
FAQs:
Q1: Why won’t my DJI Air 3S power on?
A: Ensure the battery is charged and securely inserted. Press the power button once, then hold for 2 seconds.
Q2: How do I fix GPS signal issues?
A: Move to an open area with a clear sky view and restart the drone. Ensure you have at least 10 GPS satellites connected.
Q3: My RC 2 controller isn’t connecting to the drone. What should I do?
A: Restart both devices and relink the RC 2 via the DJI Fly App under Control Settings > Link Aircraft.
Q4: Why is my drone vibrating during flight?
A: Check that the propellers are installed correctly and inspect them for damage. Replace if necessary.
Q5: How do I fix a failed firmware update?
A: Ensure a stable internet connection and retry via the DJI Fly App. Alternatively, update using DJI Assistant 2 software on your computer.
Related Guides:
- 🛠️ Setup Guide: How to Set Up DJI Air 3S Fly More Combo
- 🛡️ Safety Instructions: Safe Flying Tips for DJI Air 3S
