Resolve common DJI Avata 2 issues with our troubleshooting guide. Fix power problems, RC Motion 3 connectivity issues, video feed lag, firmware failures, and drifting flight:
Troubleshooting Tips for DJI Avata 2 Fly More Combo:
1. DJI Avata 2 Won’t Power On
- Ensure the Intelligent Flight Battery is fully charged and properly inserted.
- Press the Power Button once, then press and hold for 2 seconds to power it on.
- If the battery still doesn’t power on, use the Two-Way Charging Hub to ensure proper activation.
2. Goggles 3 Display is Blank
- Ensure the goggles are fully charged and powered on correctly.
- Check the USB-C connection to the drone or mobile device. Use the provided OTG cable for compatibility.
- Adjust the lens diopter knobs to ensure the display is visible.
- Clean the proximity sensor above the nose bridge; dirt can cause the screen to remain off.
3. RC Motion 3 Controller Not Connecting
- Ensure the RC Motion 3 controller is fully charged.
- Restart both the controller and the drone:
- Power off and on both devices in the correct sequence: Controller → Drone → Goggles.
- Re-link the RC Motion 3 using the DJI Fly App:
- Go to Settings > Control > Pair Devices.
4. Firmware Update Fails
- Check for a stable internet connection during the firmware update.
- Restart the DJI Fly App and the devices, then try again.
- Use DJI Assistant 2 (Consumer Drones Series) software to manually update the drone, goggles, and controller.
5. Poor Signal or Video Transmission Issues
- Adjust the antennas on the DJI Goggles 3 and ensure they are positioned correctly (45° angle for best reception).
- Maintain line of sight with the drone to prevent obstructions.
- Avoid areas with high Wi-Fi or electromagnetic interference.
- Switch to a different frequency band (2.4GHz or 5.8GHz) in the DJI Fly App if signal issues persist.
6. Aircraft Drifting or Unstable Flight
- Calibrate the Compass and IMU via the DJI Fly App before flying.
- Ensure the propellers are undamaged and securely attached.
- Avoid flying in strong winds, near metal structures, or in areas with magnetic interference.
7. Battery Not Charging
- Verify that the Two-Way Charging Hub is functioning correctly and connected to a power outlet.
- Check for debris on the battery connectors.
- If the battery fails to charge, try activating it through the drone directly.
FAQs:
Q1: Why won’t my DJI Avata 2 power on?
A: Ensure the battery is fully charged and properly installed. Press the power button briefly, then hold for 2 seconds.
Q2: How do I fix video transmission lag?
A: Adjust the goggles’ antennas and maintain line of sight. Switch frequency bands in the DJI Fly App if interference occurs.
Q3: Why is my RC Motion 3 controller not connecting?
A: Restart the devices, ensure full charge, and re-link the controller via the DJI Fly App settings.
Q4: What should I do if the drone drifts during flight?
A: Calibrate the Compass and IMU. Inspect the propellers for damage and avoid windy conditions.
Q5: My firmware update keeps failing. How can I fix it?
A: Check your internet connection. Use DJI Assistant 2 for manual updates if the app method fails.
Related Links:
- 🛠️ Setup Guide: How to Set Up DJI Avata 2 Fly More Combo
- 🛡️ Safety Instructions: Safe Flying Guidelines for DJI Avata 2
