SwellPro Fisherman FD1+ Drone Troubleshooting: Fix Common Problems

Resolve issues with your SwellPro Fisherman FD1+ Drone using our troubleshooting guide. Fix power problems, GPS errors, propeller issues, and more:

1. Drone Won’t Power On

   • Ensure the battery is fully charged.
   • Double-check that the battery is inserted securely and the watertight hatch is locked.

2. Battery Not Charging

   • Verify all connections: black cable to black port, red cable to red port, and the balancer cable.
   • Ensure the charger is set to 2.5 - 4 amps maximum.
   • Look for signs of damage on the battery or charger.

3. Propellers Not Spinning

   • Confirm the motors are properly calibrated after powering on.
   • Ensure the propellers are installed correctly (A propellers on A motors, B propellers on B motors).
   • Push the joysticks down and inward to engage motors.

4. GPS Not Connecting

   • Wait for at least 9 GPS satellites before flying.
   • Move to an open area with a clear view of the sky (avoid interference from buildings or trees).
   • Restart the drone if GPS does not connect after 5 minutes.

5. Drone Doesn’t Return to Home (RTH)

   • Ensure the Return to Home (RTH) switch is activated.
   • Check GPS signal; RTH will not function without sufficient GPS satellites.
   • Calibrate the compass and IMU in an open space if the drone’s position is unstable.

6. Drone Drifting During Flight

   • Calibrate the drone’s sensors using the remote controller menu.
   • Check for strong winds, as they may cause drift.
   • Ensure the propellers are securely attached and not damaged.

7. Remote Controller Not Responding

   • Replace the AA batteries in the remote controller.
   • Ensure the drone and remote are powered on in the correct order: Remote → Drone.

FAQs for Troubleshooting:

Q1: Why won’t my SwellPro Fisherman FD1+ drone power on?
A: Check if the battery is fully charged and inserted securely into the drone. Ensure the watertight hatch is locked.

Q2: What should I do if the propellers aren’t spinning?
A: Verify the propellers are installed correctly (A and B markings). Push both joysticks down and inward to start the motors.

Q3: My drone isn’t connecting to GPS. How do I fix this?
A: Move to an open area away from obstructions. Wait a few minutes to connect to at least 9 satellites. Restart the drone if necessary.

Q4: How do I fix drifting during flight?
A: Calibrate the sensors and IMU in the remote controller menu. Avoid flying in strong winds and check propeller tightness.

Q5: Why isn’t my drone returning to home (RTH)?
A: Ensure sufficient GPS signal (at least 9 satellites). Activate the RTH switch and confirm no obstructions are blocking the drone.

Related Guides:

• 🛠️ Setup Guide:
  How to Set Up Your SwellPro Fisherman FD1+ Drone: Step-by-Step Guide
• 🛡️ Safety Instructions:
  Safety Guidelines for SwellPro Fisherman FD1+ Drone